Arrow ET155 ProShot 3 Electric Heavy Duty Staple Gun

You looking to find the "Arrow ET155 ProShot 3 Electric Heavy Duty Staple Gun" Good news! You can purchase Arrow ET155 ProShot 3 Electric Heavy Duty Staple Gun with secure price and compare to view update price on this product. And deals on this product is available only for limited time.

Price: $176.30 $165.85   

Product Feature

• Uses Arrow ET155/ET150 (3/8?, 1/2?, 9/16?) as well as narrow crown staples from Duo-Fast (5/16?, 3/8?, 1/2?, 9/16?), Stanley-Bostitch (9/16?) and Crain (9/16?)
• Heavy-duty professional tool with a generous 10-foot power cord and 12 amps of power when you need it
• Features a trigger safety lock, penetration adjustment dial, and a 7/8-inch extended nose
• Includes durable blow molded case
• Easy access to staple chamber

Product Description

2750-0255 Features: -Staple gun.-Professional electric tool.-Generous 10 foot power cord.-Also uses Duo-Fast and Stanley Bostich staples.-Solid state circuitry.-Penetration adjustment dial.-Trigger safety lock.-7/8'' extended nose.-Drives into hard wood. Specifications: -12 amps or surge power when you need it.

Arrow ET155 ProShot 3 Electric Heavy Duty Staple Gun Review

Yes folks, this is a professional tool. Yes, you can use it for hobbies, like I am. But, this is by far the most rugged, sturdy, strong, effective, reliable and all-round excellent stapler I've used. But more importantly, this stapler allowed me to learn how to do (photographic fine art) canvas wraps, and do them WELL, in a very short time.

This stapler is way more expensive than the rest of them, for one reason: it's a real tool. Like a good hammer, or an excellent set of new screwdrivers. It's a joy to hold, and a pleasure to work with. The features, from the trigger lock to the long cord to the recessed depth-setting dial, the staple loading, are clearly well thought out from years of improvements and harsh industrial use. Simply everything about this stapler is top notch.

One week ago, I had not done any canvas-wraps...ever, not one. In two days I did my first two, with a spring-loaded stapler. That ended in disaster and required reprinting one of the prints. Then I used my hardware-store electric stapler, and remembered why I had long ago gone back to using the manual one...the $23 cheap electric one barely drove 1/4 of the staples home.

So, a solution needed to be found, and quick....Christmas was approaching, and I had two dozen pictures that needed be printed, wrapped and shipped! I came to Amazon knowing they'd have something better, and got this one.

BIG WORD OF ADVICE: unless you already have a source of these staples lined up, buy some when you get this stapler. They are NOT the normal hardware-store variety (T50 style). This stapler can use ONLY "Narrow Crown" staples, which are a mere 9/32" wide. They are the Arrow ET150 staples, item # 1506 (3/8", 10mm), #1508 (1/2", 12mm) and #1509 (9/16", 14mm). If you can find a local vendor, get a couple boxes of the three different lengths, and you'll be set for a long while. Otherwise, order them from Amazon. Honestly, here in Seattle there are business who sell nothing but staplers and nailers. How cool is that!

After the stapler arrived (on time, in perfect condition), and I found a local source for the staples, it took only a few minutes to figure it out, since the manual doesn't say very much. Things you should know:

Staple loading is totally easy. release the slide, and then turn the unit over and drop the staples into the channel, on the side where the smaller groove is. Slide it closed until it latches, and you're good to go. Clearing jams is equally easy, FAR easier than on any other stapler I've used. But remember: FIRST release the spring tension on the staples by releasing the slide. If you release the front-plate first, your staples will go sproing onto the floor. Anyway, release the hold-down, pull the front plate off, and there is simply no place for staples to hide! The Jam then clears easily, though it seemed a point grabbing tool might be needed. Put the plate back on and latch it down, then put the staples back in, and any jam is instantly cleared.

Using the stapler is totally easy, and it's got the strength to really push those staples in! I've found two areas that cause the staples to not go in properly. First, operator error. That usually comes down to not holding the stapler with a consistent, moderately firm force against the piece, or for some reason not holding it exactly square. That can be fixed just by your technique, and you can usually tell because you SAW that you weren't holding the stapler right, or you felt it jump. It happens; nobody's perfect.

The second reason staples sometimes don't seat is that there's a loose staple lodged in the tool head, effectively stealing much of the tool's force. If you thought you were holding the tool correctly, and you didn't feel it jump up from not enough you-pressing-down force, but the staple just didn't seat, and you almost had to pull the stapler off the staple...and the next staple does the same thing...it's time to stop, unload the staples and open the head to check. Every time it's happened to me that way, it's been a loose staple in there.

You'll get consistently excellent results if you pay close attention to how firmly you hold the stapler to the work surface. Be consistent, and be firm. Not hard, but you don't want the stapler to push itself up from the work as it drives the staple. Once you get that part of it, only unusually hard spot in the wood will make the occasional staple not drive fully in.

In the remainder of that week, I have now put together 19 canvases, and they are betting better and better. Perfect corners are now the norm. One thing I love about this stapler: that little nose where the staples come out. With that, you can get that stapler right next to where you're holding the canvas, even going between your fingers, with very little (not zero!) worry that you're going to get impaled by the staples.

I'm not sure I understand why, and there's no memory of hearing anything different, but for the last several frames, I've been able to somehow "know" that the staples are nearly out with only one, and sometimes no staples left! Uncanny.

Okay, that's enough. I really like this stapler. In the short time I've had it, I've driven probably 500 staples, with very few in any way bad. Indeed, the last picture I mounted had ZERO mis-driven, bent, or not-fully-seated staples. And no punch-throughs either! It was completely perfect.

So, stop playing with those $20 toy staplers if you want your projects to come out RIGHT with zero frustration. This is the stapler to get! Just remember...if you don't often buy nice tools, this may very well be the first time you see a truly industrial-quality tool you can use at home. that can be the start of a very dangerous tool-acquisition hobby!

If there was anything I'd change, it would be that given it's an intermittent-use thing, that cord isn't going to get warm...switch to something MUCH more flexible. They do, after all, make very flexible power cords these days...this tool could benefit from one.

Thanks, Arrow, for a great TOOL, and not another toy.

Most of the consumer Reviews tell that the "Arrow ET155 ProShot 3 Electric Heavy Duty Staple Gun" are high quality item. You can read each testimony from consumers to find out cons and pros from Arrow ET155 ProShot 3 Electric Heavy Duty Staple Gun ...