Loos Cableware 1-SC Multi-Compression Hand Swager

You looking to find the "Loos Cableware 1-SC Multi-Compression Hand Swager" Good news! You can purchase Loos Cableware 1-SC Multi-Compression Hand Swager with secure price and compare to view update price on this product. And deals on this product is available only for limited time.

Price: $226.58    

Product Feature

• Strong economical tool for swaging popular cable sleeve sizes
• 5 cavity tool swages 1/16", 3/32", 1/8", 5/32" & 3/16" copper and aluminum sleeves, not designed to swage stainless steel
• Fully adjustable to ensure accurate and complete compressions time after time
• Long life tool is packaged with manufacturer's swaging instructions and maintenance instructions
• After swage gauge included

Product Description

Multi-compression Hand Swager, for Wire Rope 1/16", 3/32", 1/8", 5/32" and 3/16" sleeves, plus 7/32" stop sleeves

Loos Cableware 1-SC Multi-Compression Hand Swager Review

I've done oval sleeves for wire rope before but usually aluminum sleeves. For my current project, I needed to crimp a 5/32 stainless steel sleeve and this swager did the job NICELY!

If you're looking at this, I would only assume you, the reader, understand what this is and how it works so I'll just describe my experience.

I'm not a HUGE guy, but I've done my dues in the gym and I run a fab shop so this tool comes in REALLY handy. The handles are about 24" long which you would think is plenty of leverage, since the jaws are compounded to multiply pressure at the jaws. I think if this thing had 36" jaws, it would be much better, or at least come with extensions. 5/32-S is only the center position. There are two positions larger. I had to close the handles against the concrete floor to get the jaws to close, so I have no idea if I would be able to close the jaws on a 3/16 stainless steel, but I think I'll be pressing my knee(s) against it, which would make it a lot more dangerous. I may have to weld on a bracket on one handle to stabilize it during operation.

Oh, on the spine of the tool is a rope cutter. It does a great job of cutting the 5/16 316 SS (19 strand) rope.

But overall, this is a good tool. I do recommend it. As always, I rate products that I am impressed with, with 4-stars because there is always something to improve on. In this case, the cutter could probably be redesigned to cut the rope closer to the sleeve. The closest cut I was able to perform was about 3/4" from the sleeve. This is WAY out there. It should be no more than about 1/4" from the sleeve, otherwise the end gets frayed and becomes dangerous.

Most of the consumer Reviews tell that the "Loos Cableware 1-SC Multi-Compression Hand Swager" are high quality item. You can read each testimony from consumers to find out cons and pros from Loos Cableware 1-SC Multi-Compression Hand Swager ...

Spyderco Schempp Tuff G-10 Plain Edge Knife, Black

You looking to find the "Spyderco Schempp Tuff G-10 Plain Edge Knife, Black" Good news! You can purchase Spyderco Schempp Tuff G-10 Plain Edge Knife, Black with secure price and compare to view update price on this product. And deals on this product is available only for limited time.

Price: $213.78 $209.11   

Product Feature

• Flat-ground drop-point Crucible CPM 3V steel blade
• Black G-10 scales
• Dimpled texture pattern
• Oversized pivot assembly and hardened steel lock interface

Product Description

The Schlepp Tuff is one knife that truly lives up to its name. Its stout CP M 3V blade is mated to a handle featuring a G-10 scale and stainless liner on one side and a solid titanium scale on the other. An oversized pivot and a Chris Reeve Integral Lock (R.I.L.) with a hardened steel insert ensure superior strength and increased wear resistance, while its dimpled texture and four-position clip provide exceptional grip and ease of carry.

Spyderco Schempp Tuff G-10 Plain Edge Knife, Black Review

This is another home run from Spyderco! The Reeve frame lock is solid and blade lock up is excellent. I think this is one of my favorite Spydercos yet! The 3V blade steel is honed to a superb sharpness for a great utility knife. This is the first knife that I have had with this blade steel, so far my impressions are excellent. I have used this knife for utility purposes with work and has worked great on cardboard, tape, insulation for electrical conductors and even peeling an apple. I was a little concerned with how the blade and handle were in the hand, but the blade is a natural pointer and is great. I would happily purchase this again. I have heard that 3V steel requires a little more maintenance in terms of rust prevention. After I used it in a high moisture environment, I wiped with blade down with a cloth and then did a quick rub down with olive oil (great oil to use if you use the knife around food) and tastes better than non cooking oils.

Most of the consumer Reviews tell that the "Spyderco Schempp Tuff G-10 Plain Edge Knife, Black" are high quality item. You can read each testimony from consumers to find out cons and pros from Spyderco Schempp Tuff G-10 Plain Edge Knife, Black ...

iEvac Smoke/Fire Hood EBP 900 American Certified

You looking to find the "iEvac Smoke/Fire Hood EBP 900 American Certified" Good news! You can purchase iEvac Smoke/Fire Hood EBP 900 American Certified with secure price and compare to view update price on this product. And deals on this product is available only for limited time.

Price: $149.95    

Product Feature

• Protects against toxic gases such as carbon monoxide, smoke, nerve gas -sarin, hydrogen cyanide, chlorine, ammonia, sulfur dioxide, hydrogen chloride, hydrogen sulfide
• American Certified - ANSI/ISEA 110, NIOSH CS/CN/P100
• Designated as an Anti-Terrorism Technology by the US Department of Homeland Security
• Has been tested by the US Army Research, Development and Engineering Command, Edgewood Chemical Biological Center
• Contains a HEPA filter that removes more than 99.996% of sub-micron particles such as anthrax, racin, smallpox and radioactive particles

Product Description

The iEvac is the first smoke/fire escape device Certified to the American Standard, ANSI/ISEA 110. Protects against toxic gases such as nerve gas-sarin, carbon monoxide, smoke, hydrogen cyanide, chlorine, ammonia, sulfur dioxide and hydrogen sulfide. Protects against harmful particles such as soot, fumes and aerosols. Provides protection for the lungs, head, eyes and face. Twin cartidges for easy breathing and an unobstructed field of view. Maintenance free with high visibility reflective strips for easy recognition. Shields against life threatening physical hazards of flammability and radiant heat. Comes in one universal size for easy and quick donning and can be used with eyeglasses, beards and log hair. Packaged in a puncture and water-proof laminate barrier. iEvac Smoke/Fire Hood, American Certified, protects against life threatening physical hazards. Designated as a Qualified Anti-Terrorism Technology by the U.S. Department of Homeland Security, Office of the Safety Act. Protects against harmful particulates: Soot, Fumes, Aerosols. HEPA filter removes sub-micron particles such as anthrax, smallpox and radioative particles. Protects against Carbon Monoxide, Chlorine, Ammonia, Sulfur Dioxide.

iEvac Smoke/Fire Hood EBP 900 American Certified Review

I did my research and with all of the product test results and certification provided, this by far seems to be the best smoke hood on the market. Thank you for giving me confidence to purchase this product.

Most of the consumer Reviews tell that the "iEvac Smoke/Fire Hood EBP 900 American Certified" are high quality item. You can read each testimony from consumers to find out cons and pros from iEvac Smoke/Fire Hood EBP 900 American Certified ...

Radiation Alert MONITOR4 Analog-Based Ionizing Radiation Detector

You looking to find the "Radiation Alert MONITOR4 Analog-Based Ionizing Radiation Detector" Good news! You can purchase Radiation Alert MONITOR4 Analog-Based Ionizing Radiation Detector with secure price and compare to view update price on this product. And deals on this product is available only for limited time.

Price: $350.00    

Product Feature

• Radiation detector used to check levels of potentially harmful ionizing particles and rays in the environment and in objects such as particle accelerators, x-ray shielding, and industrial gauges
• Detects ionizing radiation types such as alpha and beta particles, and gamma rays and x-rays
• Dual-scale analog meter with needle-point display of counts per minute (CPM) and milliRoentgen (mR) per hour
• Three selectable operation ranges of X1, X10, and X100 for adjustment when peak mR levels are met
• Red, flashing counter and a beeping noise indicate each ionizing radiation increase event

Product Description

The Radiation Alert Monitor 4 is a hand-held radiation detector with an analog display over three selectable operational ranges for detecting potentially harmful ionizing alpha and beta particles, and gamma and x-ray radiation. This meter has a dual-scale, analog, needle-point display of counts per minute (CPM), and milliRoentgen (mR) per hour. It detects the four main types of ionizing radiation: alpha and beta particles, and gamma rays and x-rays. It has three selectable operational ranges (X1, X10, or X100) to be adjusted when the meter face peaks at the highest mR level.

The Monitor 4 has a red, flashing counter and a beeping noise to indicate each ionizing radiation event. It has a halogen-quenched Geiger Mueller (GM) tube with a thin, mica end window for sensing ionizing radiation. It is used to check radiation levels in the environment and objects, such as particle accelerators, x-ray shielding, and industrial gauges. An audio indicator with an internally mounted beeper can be turned off for silent operation. The Monitor 4 cannot be returned.

Specifications

Reading Ranges	0 to 0.5, 0 to 5, or 0 to 50 milliRoentgen (mR) per hour, or 0 to 500, 0 to 5,000, or 0 to 50,000 cycles per minute (CPM).
Accuracy	Factory-calibrated by pulse generator, with accuracy + or -15% of reading full-scale, relative to Cesium 137.
Energy Sensitivity	1,000 CPM/mR/hr (Cs137).
Detection	Alpha down to 2.5 mega (million) electron volts (MeV), with typical detection efficiency at 3.6 MeV at greater than 80%. Beta at 50 kilo (thousand) electron volts (keV) with typical 35% detection efficiency. Beta at 150 kilo (thousand) electron volts (keV) with typical 75% detection efficiency. Gamma and x-rays down to 10 keV typical.
Temperature Range	-20 degrees to 55 degrees C (-4 degrees to 131 degrees F) and an internal detector.
GM Detector	Halogen-quenched with window thickness of 1.5 to 2.0 mg/cm2. The effective diameter is 0.92 cm/0.36 ��.
Dimensions	Dimensions are 209 mm x 71 mm x 50 mm (8.2� x 2.8� x 1.9� ).
Weight	178 g (6.3 oz).
Output	3.5 mm headphone jack for use with observer software (not included) and Windows-based computers.
Normal Background Radiation	Approximately 5 to 20 CPM.
Battery	9-V alkaline battery (not included) for approximately 2,000 hours of continuous use in a normal background.

Radiation detectors can detect a broad range of ionizing alpha and beta particles, and gamma and x-rays that may be emitting harmful levels of radiation. They sense ionizing radiation with an enclosed Geiger Mueller (GM) tube to count radiation particles or rays. Alpha and beta particles are measured in counts per minute (CPM) or counts per second (CPS). Gamma rays and x-rays are measured in milliRoentgens (mR) per hour, microSieverts ( Sv) per hour, or milliSieverts (mSv) per hour. Alpha particles are positively charged and heavier than beta particles, and have a limited range of approximately 3 to 5 centimeters by air. Alpha particles can be shielded by objects such as paper and unopened skin. High-energy beta particles are electrons, heavier than gamma rays, and can take either a positive or negative charge. Beta particles can be shielded by aluminum or wood. High-frequency (short wavelength) gamma rays are the strongest and lightest rays. Gamma rays are more penetrating than alpha and beta particles. They can be shielded by dense materials such as lead, and large masses of concrete, hardened steel, or water. X-rays are man-made gamma rays, and have essentially the same properties and function. Radiation detectors commonly have either an analog or a digital display. Analog radiation detectors output with a needle-point scale, and digital units generate a numerical LCD digit display. Radiation detectors are commonly used by hobbyists for safety detection and rock inspection, and professionals in the in the nuclear, medical, mining, instructional, and research industries.

SE International manufactures radiation detection products and accessories under the Radiation Alert brand. The company was founded in 1979 and is headquartered in Summertown, TN.

What� s in the Box?

• Monitor 4 radiation detector
• Carrying case with belt clip
• Instruction manual
• Conformite Europeene (CE) certification

</p>

Radiation Alert MONITOR4 Analog-Based Ionizing Radiation Detector Review

Great item to detect alpha radiation not only beta and gamma for this price, and very fast to search higher spot, if you need to connect and calculate its data, i will recommend usb version of this, but it's enoght to check aroud our environment, here in tokyo, japan.

Most of the consumer Reviews tell that the "Radiation Alert MONITOR4 Analog-Based Ionizing Radiation Detector" are high quality item. You can read each testimony from consumers to find out cons and pros from Radiation Alert MONITOR4 Analog-Based Ionizing Radiation Detector ...

PaintGage FNF-A2 Paint Meter, Mil Coating Thickness Gauge with Memory and Statistics

You looking to find the "PaintGage FNF-A2 Paint Meter, Mil Coating Thickness Gauge with Memory and Statistics" Good news! You can purchase PaintGage FNF-A2 Paint Meter, Mil Coating Thickness Gauge with Memory and Statistics with secure price and compare to view update price on this product. And deals on this product is available only for limited time.

Price: $295.00    

Product Feature

• Automatic Substrate Recognition, Single or Continoius Measurement Modes.
• Dot Matrix LCD display with Backlight. Automatic or User selectable Measurement Probe.
• Measurement Range: 0.0 to 50 mils (0 to 1250 � m). Resolution: 0.1 mils (2 µm ).
• Tolerance of readings: ± 0.1 mils + 3% ( � 2 �m + 3%) of Readings. Supplied with Calibration Standards and Fe/NFe Zero reference plates.
• Statistic Display: AVG, MAX, MIN, NO., S.DEV. Memory for 400 readings(80 DIRECT and 320 GROUP readings)

Product Description

Built upon our successful PaintGage FNF-A Paint Gauge the new FNF-A2 Coating Thickness Gauge delivers an improved measurement probe with enhanced performance and excellent substrate sensitivity. Useful in a wide variety of applications, the PaintGage FNF-A2 coating thickness meter measures non-conductive coatings over Non-Ferrous (NFe) substrates and non-magnetic coatings over Ferrous (Fe) substrates. The PaintGage FNF-A2 features dual measurement technology that automatically detects either ferrous or non-ferrous substrates and then employs either magnetic induction or eddy-current technology. PaintGage FNF-A2 is an ideal Thickness Measurement tool for measuring the Thickness of Coatings on ALL METALS. PaintGage FNF-A2 offers Statistic Display with AVG, MAX, MIN, NO., S.DEV. and Memory for 400 readings(80 DIRECT and 320 GROUP readings). USB interface and software for PC data transfer. Durable quality construction. Fast and accurate measurements. Simple operation, Mils/Microns selectable. Displays readings in Metric (microns) or Imperial units (mils). Pocket-sized for comfortable one hand operation. Supplied with a set of plastic reference test shims. Works with 2 AAA batteries. GAGE COMES COMPLETE WITH: Built-in Fe / NFe probes. Plastic test shims and 2 calibration plates (steel and aluminum). Protective storage case. 2 x AAA Alkaline batteries. User manual. 2 Year Replacement warranty. If you have any questions about this product, please call: (877) 363-4243.

PaintGage FNF-A2 Paint Meter, Mil Coating Thickness Gauge with Memory and Statistics Review

the gage works well
especially like the calibration coupons to validate the readings
easy to [program and provides consistent measures

Most of the consumer Reviews tell that the "PaintGage FNF-A2 Paint Meter, Mil Coating Thickness Gauge with Memory and Statistics" are high quality item. You can read each testimony from consumers to find out cons and pros from PaintGage FNF-A2 Paint Meter, Mil Coating Thickness Gauge with Memory and Statistics ...

Chronomite SR-20L/120 HTR 120-Volt 20-Amp SR Series Instant-Flow Low Flow Tankless Water Heater

You looking to find the "Chronomite SR-20L/120 HTR 120-Volt 20-Amp SR Series Instant-Flow Low Flow Tankless Water Heater" Good news! You can purchase Chronomite SR-20L/120 HTR 120-Volt 20-Amp SR Series Instant-Flow Low Flow Tankless Water Heater with secure price and compare to view update price on this product. And deals on this product is available only for limited time.

Price: Too low to display    

Product Feature

• 0.5-GPM flow rate
• Designed for undersink hardwiring, horizontal installation
• Two mounted chrome compression fittings
• Rear electric knock-out
• 3/8-Inch cold water inlet and outlet connections

Product Description

Chronomite was the first to patent a microprocessor technology which allows for a pre-set or controlled output temperature that delivers unlimited hot water without risk of scalding-in two seconds as opposed to the six seconds offered by other tankless water heaters. Chronomite is installed at point of use and is only operational when hot water is requested, thus dramatically reducing hot water delivery time and inefficient use of electricity.

Chronomite SR-20L/120 HTR 120-Volt 20-Amp SR Series Instant-Flow Low Flow Tankless Water Heater Review

Installation much more complicated than advertised requiring plumbing and electrical work. Water flow is very slow and temperature is tepid. You can use included pressure nozzle which slightly helps. I would not recommend this product even for a vanity sink in Southern California.

Most of the consumer Reviews tell that the "Chronomite SR-20L/120 HTR 120-Volt 20-Amp SR Series Instant-Flow Low Flow Tankless Water Heater" are high quality item. You can read each testimony from consumers to find out cons and pros from Chronomite SR-20L/120 HTR 120-Volt 20-Amp SR Series Instant-Flow Low Flow Tankless Water Heater ...